Over the next few months, the software will be installed on every millimeter wave imaging technology unit in the field. Future millimeter wave units will come with the new software already installed. There are currently nearly 500 AIT units in the field (both backscatter and millimeter wave), and there are plans to roll out even more later this year. As far as backscatter units, there are plans to test similar software in the fall.
If you’re not familiar with ATR, it works with our imaging technology (Body Scanners) and eliminates passenger-specific images and replaces them with the generic outline of a person. Here’s how it works: You step into the AIT machine and the new software will auto-detect potential threats and show their location. The image is on a monitor that is attached to the AIT unit in public view. Because this eliminates privacy concerns, we no longer have to place an officer in a separate room to view the images.
If there is no alarm, the following is displayed:
We are always looking for new technology and procedures that will both enhance security while strengthening privacy protections. That’s why we worked with the Department of Homeland Security’s (DHS) Science & Technology Directorate (S&T) and private industry to develop the software. For more information about TSA and advanced imaging technology, visit www.tsa.gov/ait.
If you’d like to comment on an unrelated topic you can do so in our Off Topic Comments post. You can also view our blog post archives or search our blog to find a related topic to comment in. If you have a travel related issue or question that needs an immediate answer, you can contact a Customer Support Manager at the airport you traveled, or will be traveling through by using Talk to TSA.